em2018
Newbie level 6
Hi everyone
I found a .lib file for a diode I want to use in my simulation, but I have no idea how to import it! Could anyone offer any suggestions? Or point me towards alternative approaches?
Here is the contents of the .lib file I found if it matters:
Thank you,
Em
I found a .lib file for a diode I want to use in my simulation, but I have no idea how to import it! Could anyone offer any suggestions? Or point me towards alternative approaches?
Here is the contents of the .lib file I found if it matters:
Code PHP - [expand] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 * ZETEX BBY40 Spice Model Last revision 18/8/92 * .MODEL BBY40 D IS=7.417E-15 N=1.058 RS=.1259 XTI=3 + EG=1.11 CJO=64.39E-12 M=1.013 VJ=2.566 FC=.5 BV=45.12 + IBV=.1232 TT=215E-9 * * + ISR=1.731E-12 NR=2.27 IKF 9.882 (LATER SPICE VERSIONS ONLY) * *NOTES: FOR RF OPERATION ADD PACKAGE INDUCTANCE OF 2.5E-9H AND SET * RS=0.47 FOR 2V, 0.39 FOR 5V, 0.32 FOR 10V OR 0.28 FOR 20V BIAS. * * (C) 1992 ZETEX PLC * * The copyright in this model and the design embodied belong to * Zetex PLC ("Zetex"). It is supplied free of charge by Zetex for * the purpose of research and design and may be used or copied * intact (including this notice) for that purpose only. All other * rights are reserved. The model is believed accurate but no * condition or warranty as to its merchantability or fitness for * purpose is given and no liability in respect of any use is * accepted by Zetex PLC, its distributors or agents. * * * Zetex PLC, Fields New Road, Chadderton, Oldham OL9 8NP
Thank you,
Em
Last edited by a moderator: