how to use a .net file for @ds?

[dot13]

I got a .net model file, and want to simulater my schematic in @ds. How to use it?

Somebody tell me to import the file. While after import, I got a schematic with all the devices array in it, but all the devices have no model parameters. I copy one to my schematic and simulate, @ds report error for can not find model.

 

[khouly]

use netlist include component , use it to point to the .net file

in the devices that u use , type the same model name in model araea

just it

khouly

 

[dot13]

use netlist include component , use it to point to the .net file

in the devices that u use , type the same model name in model araea

just it

khouly

I added a "netlist include"compent, and set the "model library file" to the .net file. Then change the MOS devies model name to the model name according the file. But it report the following error:

Simulation / Synthesis Messages


Error detected by HPEESOFSIM during netlist parsing.
While evaluating expression `nch_rfw10.Xl':
expression has not been defined.
Error detected by HPEESOFSIM during netlist parsing.
Unresolved references:
pdio_cjfac
ndio_cjfac
pmos_uefffac
pmos_rdswfac
pmos_k1fac
pmos_vthfac
pmos_dwfac
pmos_dlfac
nmos_uefffac
nmos_rdswfac
nmos_k1fac
nmos_vthfac
nmos_dwfac
nmos_dlfac
pmos_toxfac
nmos_toxfac
pmos_cgdfac
nmos_cgdfac


Status / Summary


HPEESOFSIM (*) 2003C.300 Nov 25 2003 (built: 11/25/03 22:11:44)
Copyright Agilent Technologies, 1989-2003.
--------------------
Simulation terminated due to error.
--------------------