Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The projects are based on PIC chips. but it can easily be re-written to other languages, once u understand the basic workings of the AT keyboard.
For your project, the mcu need to be able to interface correctly with the keyboard. Buffered the key that u type n then u display them on ur matrix leds.
well, try to be more specific. this way we can b more precise to your solution
Re: how to use a keyboard to control the dot matrix display!
you must learn how connect ucontroler to pc-at keyboard and
then write program for dot matrix display
and if you have few port you can use multiplexing...
Re: how to use a keyboard to control the dot matrix display!
if he wanna keep data when the power is off must put eeprom or ....) 2-3 battery.
i haven't make that tipe of circuit, i have been read some in the net for this but... think is not so hard to make this
Re: how to use a keyboard to control the dot matrix display!
I have schematic and source code from google Schematic and source code here i Make experiment and i change ic with Atmega8535 why LCD no work,IF u can compiler for Atmega8535 share here i will experiment because my circuit is final and no conect to dotmatrix but conect LCD 2x16 only,i'm sorry my speak english is bad
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.