Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to switch on and switch off 3000V?

Status
Not open for further replies.

bomba

Full Member level 2
Joined
Sep 9, 2003
Messages
134
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
1,193
I need to generate square wave from a 3000V capacitor charged, the problem is how to switch on and off, which kind of component can do it?

Maybe a power thyristor

Any comments are welcome

Thanks in advance
 

depends on frequency ... vacuum relay is option for switch on and of
 

Certainly thyristors can be used.
there are other power semiconductor devices also available like IGBT which can work at such a high voltages. (quite expensive ).

Or you can step down you voltage for switching action and then again step it up (if your application permits ).
 

I need to switch on , stay on 1uS and later switch off.
I can't use ste up converters.

Thanks
 

i think you will have to use some kind of magnetron switch.
if you just want to generate a 1us pulse of kv range then you can use a pulsar in lower voltage range using mosfet and step it up to the required voltage using a pulse transformer.
you can use spark gap as well if your circuit turns off on its own.
what king of application you are looking for?
Hock
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top