how to suppres the pin using allegro 16.3?

[danismith]

hai friend,
can any one tell me what is the use of suppressing the pin & how to do?

 

[kondor_konami]

hai friend,
can any one tell me what is the use of suppressing the pin & how to do?

Hello,

Describe your issue first. What software are you using from the Allegro Suite? What issues have you encountered with it?

If you just want someone to tell you what is pin suppression and how to do it in Allegro Suite, just google-it!!

Another option is to email the support from Candence. They will surely answer your questions.

Regards,
Kondor.

 

[danismith]

hi,
kindly read my question,over there i have written it clearly regarding the software.
if u can help just try......

 

[sivamani]

Suppressing pins in artwork generation?If yes this is used for vias or thru holes to remove the pad stub in inner layers wherever it is not connected..

 

[danismith]

hi sivamani,
you are wright.i need to supress while generating artwork.
Thank you

- - - Updated - - -

hi,
just observe the black circle in this picture,this is also similar to pins,my friend used to swap pins many time,sometimes he used to leave just like that.when i try to the same on the design i used to get some error so i give no connection 'X' mark to the pin.
so can u try to tell me what is it?

 

[sivamani]

X mark is for NC indication u can add this in all no connected pins to avoid warnings...

 

[danismith]

hi,
The thing is, can i leave a pin without connecting or marking X( nc) and then, can i generate net list,will i get any error?

 

[sivamani]

u can i think it will give just warning..

 

[danismith]

hi,
i'll try it on my schematic if there is an error,i'll report it to you.

Thank you so much.