Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to shift 3.3 voltage level to 5V most efficiently?

Status
Not open for further replies.

thisistausif

Member level 2
Joined
Aug 3, 2005
Messages
49
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Location
india
Activity points
1,662
hello

wanna shift a 3.3 voltage level(digital logic ) to a 5v logic whats the best and efficient process.
 

Re: voltage shifter

YOUR QUESTION IS OPEN ENDED BECOUSE
YOU FAILED TO SPECIFY WHAT YOUR SHIFTING

A BUS?? A SINGLE RAIL

BE MORE SPECIFIC PLEASE

THERE ARE DEDICATED BUFFERS FOR LOGIC ARRAYS
AND ALSO IC'S {CHARGE PUMPS} TO DO THIS JOB FOR RAILS
 

Re: voltage shifter

how many...8? ,16?
there are buffer for each of this...
you can use 8 pcs single buffer.
or one pc octal buffer.

:D
 

Re: voltage shifter

MC74HC245A - Octal 3-states non-inverting Bus Tranceiver
The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.

Supply Voltage (Referenced to GND) min 2.0 Volt max 6.0 Volt

Operate this chip with 3.8 Volt DC supply, at this condition VOH (High Level Output Voltage) and VOL (Low Level Output Voltage) still meet 5 Volt logic device VIH (High Level Input Voltage) and VIL (Low Level Input Voltage) requirement
 

voltage shifter

Yes, The 74 series chips.
 

voltage shifter

any other idea!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top