How to run simulation on MPLAB ?

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Guys,
Do you know on how to run simulation on MPLAB ?

Thanks
 

On MPLAb you can get the hex code. For simulation you have to use different tool. e.g. PROTEUS software creates the real enviornment for simulation. You neeed to draw the circuit and burn the HEX code in progrramable IC.
Run the simulator and njoy...


Hope this is helpful.
 

While it is true that MPLab does not do analog circuit simulation, it is a complete IDE:

There are various tutorials, including one from Microchip in the above referenced guide for using the simulator functions. After you review that tutorial, it will be much easier to address any specific questions yo may have.

John
 

As others said, you cannot use MPLAB for simulation purposes. MPLAB is used to compile the assembly or C code to get the hex code and for debugging the bugs. You have to use softwares like Proteus for simulating the Project...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…