Vincent13
Newbie level 3
Its for a project, and I pretty much can handle all parts of a bluetooth module and MCU through UART... With Hyper Terminal, set same baud rate for both chips through serial port of each USB to rs232 converter
AT Commands through hyper terminal for module is easy considering they are giving when buying module ( baud rate, setting password, ect )... Only problem comes when I bought PIC, it did not come with at commands, and I was wondering how to receive readable data
from bluetooth module ( slave ) MCU ( host ) , do I need any particular things to do, or it automatically reads it if set to same baud rate ? Then once it bluetooths back to PC , you can read/open data in any format ? Please help me, I am confused and there is a deadline, any help will be greatly appreciated
Thank you
AT Commands through hyper terminal for module is easy considering they are giving when buying module ( baud rate, setting password, ect )... Only problem comes when I bought PIC, it did not come with at commands, and I was wondering how to receive readable data
from bluetooth module ( slave ) MCU ( host ) , do I need any particular things to do, or it automatically reads it if set to same baud rate ? Then once it bluetooths back to PC , you can read/open data in any format ? Please help me, I am confused and there is a deadline, any help will be greatly appreciated
Thank you