tarjina
Junior Member level 3
Hi, I am new to post layout simulation. I am having trouble in interpreting the extracted netlist. Can someone please translate the statements to English language!!!
This is a netlist generated with Calibre xRC . I think *|I means Instance, *|P means port, *|S means subnode. But I can't understand which instance is connected to where. I think, I have made my question clear. Thanks a lot in advance!!
Code:
*|NET in 2.04548e-17
*|I (XI5:A XI5 A X 0.0 0.2867 0.945)
*|I (XI9:Z XI9 Z X 0.0 6.562 0.945)
*|P (in X 0.0 6.562 0.945)
cin|0 XI5:A VSS 0.0204548f
rin|1 XI5:A in 2.47625 tc1=0.00198969 $w=0.05 $l=0.2607 $layer=M1 $X=0.2867 $Y=0.945 $X2=0.026 $Y2=0.945
rin|2 in XI9:Z 0.001 $X=6.562 $Y=0.945 $X2=6.562 $Y2=0.945
*
*|NET net8 1.7039e-16
*|I (XI5:Z XI5 Z X 0.0 0.7297 1.1697)
*|I (XI6:A XI6 A X 0.0 1.7447 0.945)
*|S (net8:10 1.322 1.429)
*|S (net8:11 1.347 0.945)
*|S (net8:16 0.7297 1.17)
*|S (net8:6 0.73 1.429)
*|S (net8:7 1.297 1.454)
*|S (net8:8 0.755 1.454)
*|S (net8:9 1.322 0.97)
cnet8|0 net8:11 VSS 0.00515792f
cnet8|1 net8:10 VSS 0.0381254f
cnet8|2 net8:8 VSS 0.00999683f
cnet8|3 net8:7 VSS 0.0625453f
cnet8|4 net8:6 VSS 0.0280877f
cnet8|5 XI6:A VSS 0.026477f
rnet8|6 net8:9 net8:11 0.322765 tc1=0.00169181 $w=0.05 $l=0.0353553 $layer=M1 $X=1.322 $Y=0.97 $X2=1.347 $Y2=0.945
rnet8|7 net8:9 net8:10 4.35979 tc1=0.00198969 $w=0.05 $l=0.459 $layer=M1 $X=1.322 $Y=0.97 $X2=1.322 $Y2=1.429
rnet8|8 net8:7 net8:10 0.322765 tc1=0.00169181 $w=0.05 $l=0.0353553 $layer=M1 $X=1.297 $Y=1.454 $X2=1.322 $Y2=1.429
rnet8|9 net8:7 net8:8 5.14816 tc1=0.00198969 $w=0.05 $l=0.542 $layer=M1 $X=1.297 $Y=1.454 $X2=0.755 $Y2=1.454
rnet8|10 net8:6 net8:8 0.322765 tc1=0.00169181 $w=0.05 $l=0.0353553 $layer=M1 $X=0.73 $Y=1.429 $X2=0.755 $Y2=1.454
rnet8|11 net8:6 net8:16 2.4601 tc1=0.00198969 $w=0.05 $l=0.259 $layer=M1 $X=0.73 $Y=1.429 $X2=0.73 $Y2=1.17
rnet8|12 XI6:A net8:11 3.77754 tc1=0.00198969 $w=0.05 $l=0.3977 $layer=M1 $X=1.7447 $Y=0.945 $X2=1.347 $Y2=0.945
rnet8|13 XI5:Z net8:16 0.0028191 tc1=0.00167 $w=0.0505 $l=0.0003 $layer=M1 $X=0.7297 $Y=1.1697 $X2=0.7297 $Y2=1.17