Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to protect when AC240V is accidentally wired to DC o/p?

Status
Not open for further replies.
J

juihau

Newbie level 4
Joined
Feb 20, 2008
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,344
Hi all, I am thinking is there a way to protect the power supply when,
AC240V is accidentally wired to the 24V DC output?

The power supply has to function normally when the fault is removed.
Pls share with me any ideas you have. Thank you!
 

The only simple you can do is to use a relay to cut off and isolate the circuit when ever any voltage above 24 is applied to the same.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top