Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to prevent tracks moving in room1 while we move room2

Status
Not open for further replies.
M

mohammad13

Newbie level 1
Newbie level 1
Joined
Nov 30, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
I am working with Altium2013. I am using two channels on my board but channel1,s room has used as bottom layer room and channel2 has used as top layer room and they are opposite each other on the board.after routing traces in room1 and room2,when I want to move room1,all tracks on room2 are moving too.
there is not problem in Altium6.9 but this problem occures in Altium10,13,14.
how can i solve this problem?
thanks
eda.jpg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top