How To Operate Beacon Receiver ASC 300KUE-T

[other-side-of-d-moon]

Dear Friends

I brought a beacon receiver (ASC 300KUE-T Brand), i have connected it to LNB but i don't know how to get the signal levels, the software i think is very basic because it only has one window as shown in the link below. Please guide me whither i'm mistaken or not? did i forget something? should i connect other equipment to the receiver to measure the signal?


here is the software window
https://obrazki.elektroda.pl/1680061900_1413095742.jpg



This is the receiver specifications
file:///Users/dahonest/Desktop/ASC300KUET.pdf

 

[Borber]

Oscillator frequency in LNB must be known. Frequency window in your software must be filled with difference between beacon frequency and LNB oscillator frequency. When antenna is positioned to satellite you will get DC output (BNC).

 

[other-side-of-d-moon]

Thanks alot Borber about your valuable help, in which do you think signal strength will come out?

 

[Borber]

As per datasheet DC is availale on BNC connector and terminal plug.