Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to model a via though an infinite ground plane between two dielectric layers

Status
Not open for further replies.
G

Groc

Newbie level 1
Newbie level 1
Joined
Oct 30, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
6
In IE3D, I have a feed structure on one layer, with a via penetrating an infinite ground plane to feed an antenna on a second layer on the opposite side. As far as I understand, there are two methods of modelling the effects of the aperture or void in the ground plane through which the feed/via passes, but do not know how to physically model them?? Any help will be gratefully received!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top