Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to manage hardware flow control command with GSM modem

Status
Not open for further replies.
C

chetanjadhav

Newbie level 3
Newbie level 3
Joined
Jun 19, 2015
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
26
As i am using Sierra Wireless GSM GPS module HL-6528-G2.8V, in which my module is taking GPS frames and after filling it in my packet format ,it is sending this packet format on TCP towards server.
I am using TCP connect, Packet send, TCP disconnect in this fashion cycle continuous with interval of 1 minute.
Problem is only 14 packets are getting sent. From datasheet i ahev come to know that I have not defined Hardware data flow using AT&K3 command. When i send AT&K3 command then module hang up there or stops there.

I don't know why this is happening? Please any one can help me in this...

Thank you in advanced.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top