Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to make Dipole Antenna Through Microstrip?Help plz!!!

Status
Not open for further replies.

telecom_engr

Newbie level 2
Joined
Aug 23, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
how to build dipole antenna

hi guys...im studying telecom engrng n i got semester project on ""how to make a dipole antena through microstrip."" kindly help me in building it from very basic ideas...i mean tell me how n from where to start n wat r the basic things to consider n etc.....
 

how to make dipole antenna

maybe you can make each arm λ/4 long, resulting to overall λ/4 length. then, for 50Ω transmission, you can tune your antenna through simulators like HFSS.

Attached is a tutorial for a dipole printed on a dielectric substrate design using HFSS. maybe it might help

For the feed, if you have an unbalanced transmission line coming to your antenna, you need to make it balanced.

Hopefully, this helps.
 
how to make a dipole antenna

thanx mate...i will try n let u knw.....once again thank u very much
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top