how to make a battery model of NiMH on HSPICE?

Status
Not open for further replies.
A

allennlowaton

Full Member level 5
Joined
Oct 5, 2009
Messages
247
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Taiwan
Activity points
3,066
hello EDA fellows...
I would like to ask on how to make a battery model of NiMH using the HSPICE.
I have one model here from a paper and shown below:
**broken link removed**



I'm confused on the values of the Rtransients and Ctransients. And when the steady state comes, does it mean those components will have a different values?

Thank you for taking time on this.
 

allennlowaton said:
**broken link removed**

I'm confused on the values of the Rtransients and Ctransients. And when the steady state comes, does it mean those components will have a different values?
Click to expand...

I think these transient parameters depend only on the SOC and -- to some extent -- on (pulse) current*, as shown by the fig. 7 & 10 of the a.m. publication. Seems they can be approximated quite well by their constant + (neg.) exponential modeling, s. equs. (4) to (7). For the steady state, there's no change necessary for these parameters: the (SOC-dependent) sum of the 3 series resistors in the shaded area is equally effective in steady state.

*) this latter and weaker effect is not modeled
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…