How to learn Control Engineering for an electronic engineer?

[hardings]

digital control engineering+book

Hi,

I want to study Control Engineering more, and my background is electronic engineer,
Do you have any suggestion or any good forum or material to me?
BTW, I am reading " Modern Control Engineering" , the 4th edtion, I found it it not good enough.
It introduces some ways to analyse but it has little "understanding" about the control system.

Any feedback is welcome!

Hardings

 

[armsgroup]

how to learn controls

hi I think these lectures will be good
**broken link removed**

 

[coshkun]

site:edaboard.com digital control systems kuo

Katsuhiko Ogata - Modern Control Engineering
I think this is one of the best books on control engineering.

 

[yangxh]

how to learn engineering

Modern Control Engineering .I think it is not difficult to learn for you as an electronic engineer.

 

[Nimer]

automatic control systems benjamin kuo free ebook

hi
start by learning the following book
modern control engineering by nise
its available on this site

best regards

 

[bjerkely]

automatic control systems benjamin kuo free ebook

As an Electronic Engineer you can learn Control Theory easily,It's based on good understanding of Laplace Transform.I suggest Control Systems Engineering by Norman Nise,it's a very useful book that you can read with pleasure.

 

[FD357]

best book for control engineering

Control theory is important, but if you are going to focus on application, then you need have knowledge about something like motor, sensor, plc, and spesific contorl object.

 

[yangxh]

control engineering

When Control theory going to application,hardware knowledge is also needed.Control have to be performance on the electric equipment,as well as some MCU used in industrial control areas.

 

[saudrehman]

www.rockwellautomation/literature

Try Automatic control systems By B.C .KUO.
It is the best book for beginners in controls.

It is available in the ebook section along with soultion maual.

 

[har_namana]

digital control　system kuo lectures

could you please post the link to the ebook. I appreciate that, thanks.

 

[amrsah61083]

learn control

both nise and ogata are similar in subjects but in differnt explaination so better try nise more simple than ogata

 

[hiyan]

claymore.engineer.gvsu.edu

Author name is DAzoo and 2nd is philips.

 

[wini]

learn control systems

Hi

U can connects between an electronic eng and control science by an other good book :
Digital Control Systems Second Edition by Benjamin C. Kuo


we are studying in our university.

 

[atc9443]

elecronics engineeers

You can find plenty of free literature from Rockwell Automation's literature library

Literature Library

Also, here is a great ebook on automatated manufacturing systems,
(programmable logic controllers) PLCs.
contains:

Chapters

* Cover Page
* Programmable Logic Controllers
* PLC Hardware
* Logical Sensors
* Logical Actuators
* Boolean Logic Design
* Karnaugh Maps
* PLC Operation
* Timers, Counters and More
* Structured Logic Design
* Flowchart Based Design
* State Based Design
* Numbers and Data
* PLC Memory
* Ladder Logic Functions
* Advanced Ladder Logic Functions
* Open Controllers
* Instruction List Programming
* Structured Text Programming
* Sequential Function Charts
* Function Block Programming
* Analog Inputs and Outputs
* Continuous Sensors
* Continuous Actuators
* Continuous Control
* Fuzzy Logic
* Serial Communication
* Networking Communication
* Internet
* Human Machine Interfaces (HMI)
* Electrical Design
* Software Design
* Selecting a PLC
* Appendix - Function References
* Appendix - Glossary
* Appendix - References
* GFDL

MODERATOR ACTION: Book deleted. It is available here:
**broken link removed**

 

[tbekir]

modern control engineering kuo

HI! I need the solution manual of Modern Control Engineering by K. Ogata.
Can somebody help me?

 

[maryn]

electronic engineer cover page

can any one please help me find the solutions manual to:

modern control engineering by katsuhiko ogata 4th edition

e-mail:
mary999s1(at)aol.com

thanx.

 

[PLCMentor.com]

learn controls engineering

The reality is that the best way to learn control engineering since you already have a degree is to look for a job in the controls industry. You can read all the books you want and take all the courses you want but the best way to learn controls is by doing. You should look for a company with strong mentoring. You can use our site at plcmentor.com for automation training and mentoring via the forum, but it is best to be able to follow up by using what you have learned in the real world.

 

[elrayes]

best university to learn control systems

if you want to learn control from the practical point of view (systems and components) then go ahead with this book "Modern Control Technology components" for kilian.
to know more about system design from the point of view of theoretical and mathematical modeling then go ahead with "Modern control engineering" for ogata.

 

[AlBo]

nise control engineering lectures

Hi fellows !

One of the best books about the control theory is :

Dorf, Bishop : Modern Control System, 11th Ed.
Pearson Education, 2008
ISBN: 0132451921 .


Find it and read it .

Good luck!