How to learn Analog Circuit Design?

[triquent]

learn analog circuit design

Hey guys,
How to begin to learn the analog circuit design, not the analog IC design?
Which book is good? How to learn to build up circuits?

 

[suns]

freeware analog simulators

design of analog coms integrated circuits ,razavi.

Added after 3 minutes:

coms analog circuit design,E.allen
the art of analog layout,alan hastings.

 

[gevy]

how to learn circuits

Read the book

The Art of Electronics
by Paul Horowitz, Winfield Hill

 

[nand_gates]

learn analog electronics design

"Student Manual for the Art of Electronics " is also a great book for
learning.

 

[PONDERBOY]

learn analog or dc circuit design

I recommand you to read gray's book:<analysis and design of analog integrated circuits>

 

[Okkam]

how to learn analog ic design

Hi

This book is also good. Similar as Art of Electronics

Advanced Electronic Circuits, Titze and Schenk.

 

[sunking]

how to learn analog

read the above books is a way,
another way is that you do the project and tapeout and test.

 

[chingtang]

Try Microelectronic Circuit Design, 2/e Richard Jaeger, Auburn University. That's good for the beginners.b

 

[electron_boy]

I recommand you to read gray's book:<analysis and design of analog integrated circuits>

i agree this one is excellent

gray and meyer - "analysis and design of analog integrayed circuits"

and also these

sergio franco - "design with opamp and analog integrated circiuts"- mcgraw hill

gayakwad - "opamps and linear integrated circiuts"

 

[Elc]

I suggest you one of the best book i have ever seen:
Electronic circuit analysis and design
By: Donald Neamen

 

[selvaraja]

reading books only won`t help you much try to start design to gain some pratical experince

 

[cqukelly]

design of analog coms integrated circuits ,razavi.
i think this book is very good!

 

[bimbla]

I think you should start with semiconductor theory. Know how and why a diode is built, then transistors, then other semiconductor devices.

Know your devices well before you use them to build circuits.

A fantastic book for begginers is Electronics Design and Circuits by Allen Mottershed.

Also be in a group which 'talks' Analog. This will also help a lot.

Then start asking questions and building small circuits on breadboard.

bimbla.

 

[yaxazaa]

read books, practice small designs, starting from current reference/voltage reference, the amplifer. Building youself good fundymental on Opamp. Then choose one area: PLL, ADC/DAC, Filter, Power Management, etc. Need learn good tools as well.

 

[triquent]

two questions:
1) what tools to learn. I know only hspice.
2) which area is better in those areas you listed.

read books, practice small designs, starting from current reference/voltage reference, the amplifer. Building youself good fundymental on Opamp. Then choose one area: PLL, ADC/DAC, Filter, Power Management, etc. Need learn good tools as well.

Added after 5 minutes:

questions:
1)if you learn by yourself, then how can you practice to build small circuits on breadboard and test it? you buy your own components and test equipment? feel too hard to build circuits at home?
2) is there any book shows a lot of projects you can practice?
3) where to find a group to talk "analog" except here.

I think you should start with semiconductor theory. Know how and why a diode is built, then transistors, then other semiconductor devices.

Know your devices well before you use them to build circuits.

A fantastic book for begginers is Electronics Design and Circuits by Allen Mottershed.

Also be in a group which 'talks' Analog. This will also help a lot.

Then start asking questions and building small circuits on breadboard.

bimbla.

 

[qutang]

find some book of low frequency and high frequency 's book.

 

[choplin]

First,basic theory of semiconductor.Second,the key component.Final,design some circuit or sysetem.

 

[rambus_ddr]

I think you only master one book Paul gray "analysis and design of analog integrated circuit", you can solve different analog circuit problems.

 

[layes2]

analog circuit could begin with opamp design

 

[jinhaozi]

The point of learn is to master a classic not all the books. Gray's book is such a book which called classic.