how to know which bsim model is used by cadence

[pekachoo007]

how to know which bsim model has been used by cadence

 

[erikl]

The LEVEL parameter (in the model file) determines this.

 

[pekachoo007]

how to access this model file in cadence environment

 

[pancho_hideboo]

how to know which bsim model has been used by cadence

What do you mean by "cadence" ?
If you use Cadence Spectre, see simulation log file, e.g. "spectre.out".
You can find "Circuit Inventory", there you can see used device model counts.

 

[pekachoo007]

What do you mean by "cadence" ?

What is this??

 

[pancho_hideboo]

What is this??

There is no tool which name is Cadence.
Even if you use Cadence ADE, you can launch many vendor's simulators, e.g. hspice, eldo, GoldenGate, .etc.

Always describe correct tool's name and vendor's name which you use as tool or simulator.

You can find out "Circuit Inventory" in log file of any vendor's simulator.

 

[pekachoo007]

There is no tool which name is Cadence.
Even if you use Cadence ADE, you can launch many vendor's simulators, e.g. hspice, eldo, GoldenGate, .etc.

Always describe correct tool's name and vendor's name which you use as tool or simulator.

You can find out "Circuit Inventory" in log file of any vendor's simulator.

how to access this log file

 

[pekachoo007]

You can find out "Circuit Inventory" in log file of any vendor's simulator.

Thanks pancho_hideboo for the hint

- - - Updated - - -

The LEVEL parameter (in the model file) determines this.

Could you please elaborate, erikl

 

[erikl]

The LEVEL parameter (in the model file) determines this.

Could you please elaborate, erikl

Check here!

 

[pancho_hideboo]

The LEVEL parameter (in the model file) determines this.

This is for SPICE Syntax Model File.

If you use Cadence Spectre Syntax Model File, there is no Level parameter.

See https://edadocs.software.keysight.com/display/ads2009/BSIM3+Model-BSIM3+MOSFET+Model

This is a reason why I say "Always describe correct tool's name and vendor's name which you use as tool or simulator.".

 

[pekachoo007]

This is for SPICE Syntax Model File.

"Always describe correct tool's name and vendor's name which you use as tool or simulator.".[/QUOTE]

Spectre Dongbu PDK 0.13u bsim4 models

 

[pancho_hideboo]

You can see Spectre Log File.
There you can find out "Circuit Inventory".
https://www.edaboard.com/threads/182455/

Spectre Dongbu PDK 0.13u bsim4 models

https://edadocs.software.keysight.com/display/ads2009/BSIM4+Model-BSIM4+MOSFET+Model