If possible,can you upload the datasheet of the stepper motor model that you are using..?
With the specifications given,the current drawn comes out to be about 0.66A. The microcontroller port can give at-most 20mA. You will need to increase the magnitude of current drawn.Secondly is it 8051..?Or is it 8051 based microcontroller..?
(AT89C51)
If possible,can you upload the datasheet of the stepper motor model that you are using..?
With the specifications given,the current drawn comes out to be about 0.66A. The microcontroller port can give at-most 20mA. You will need to increase the magnitude of current drawn.Secondly is it 8051..?Or is it 8051 based microcontroller..?
(AT89C51)