Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
At minimum you need a preamp and an ADC for the microphone and a DAC and an audio amp for the loudspeaker output.
There are microcontrollers which have built in ADC's and PWM outputs. Voice processing will require a significant amount of processing power and buffer memory, you will need a high end microcontroller for this, paticularly if you are going to use a speech codec or do echo cancelation.
You might find that some analog processing before the ADC such as some filtering and AGC will make the device perform better.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.