Isuru Senarath
Member level 2
Hi all,
I need to filter received sms as follows.
If received sms contain "Route 2"
LCD must display : Line 1 = Route 2
Line 2 = message (received sms)
If received sms contain "Route 1"
LCD must display : Line 3 = Route 1
Line 4 = message (received sms)
I did successfully for Line 1 and line 2, How can I do it for line 3 and 4?
following is my code. I also attached a picture of received sms and AT commands
I need to filter received sms as follows.
If received sms contain "Route 2"
LCD must display : Line 1 = Route 2
Line 2 = message (received sms)
If received sms contain "Route 1"
LCD must display : Line 3 = Route 1
Line 4 = message (received sms)
I did successfully for Line 1 and line 2, How can I do it for line 3 and 4?
following is my code. I also attached a picture of received sms and AT commands
Code:
void read_text( unsigned char *msg,unsigned char *no ,unsigned char *time)
{
char i=0;
unsigned char *temp;
temp=msg;
start:
do
msg++;
while(*msg!='"');
{
if (i++==4){
msg++;
do
*no++=*msg++;
while (*msg!='\"');
}
else
{
goto start;
}
}
do
msg++;
while(*msg!='\n');
msg++;
do
*temp++=*msg++;
while(*msg!='\r'); // reaching at end of message
*temp='\0';
{
if (*msg=='2');
lcdcmd(0x80); // 1st line address
lcdstr(rec_no); // array having receipt no
lcdcmd(0xC0); // 2nd line address
lcdstr(msg1); // array having message
}
if (*msg=='1');
{
lcdcmd(0x94); // 3st line address
lcdstr(rec_no); // array having receipt no
lcdcmd(0xD4); // 4nd line address
lcdstr(msg1); // array having message
}
}