Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to extract selected nets RC in a hierarchical design

Status
Not open for further replies.
E

ehome

Newbie level 1
Joined
Sep 10, 2002
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Shanghai
Activity points
7
When I perform RC extraction with special nets in a hierarchical design. The tool (StarRCXT) faild to find those nets in sub blocks.
Nets defined in file star_cmd are in this format:

NETS: X0/X2/NET_3
NETS: X0/X2/NET_6

......

Anyone here can help me on this issue? Thanks a lot!

ehome
 

StartRC can only extract real "physical nets",
NETS: netname,
When you flatten the hierarchical netlist to flat netlist, the netname must be found in the flat netlist.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top