Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to excite TE21 mode in circular waveguide with HFSS

Status
Not open for further replies.
M

mianjuyan

Newbie level 4
Joined
Mar 26, 2014
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
44
Hi,guys

I am trying to correctly excite the TE21 mode in circular waveguide with HFSS. I set the number of modes as 5. The first two correspond to TE11 mode. And the third one corresponds to TM01 mode. The last two corrspond to TE21 mode. I used two perpendicular integration lines for TE11 mode, one integration line for TM01 mode, and again two perpendicular integration lines for TE21 mode. But the simulation failed to meet the convergence after many passes. I believe there should be something wrong with the integration lines. Could someone tell me how to do this? i really need your help.
Thanks in advance!

Best regards!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top