Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to draw the coaxial cable feeding for spiral antenna design in CST?

Status
Not open for further replies.

misz

Newbie level 1
Newbie level 1
Joined
Feb 17, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
Hi...

can u all tell me how to draw the coaxial cable feeding for spiral antenna design?what the material is used.and is it need to calculate?
 

coax cable in CST

You can draw a coaxial cable by drawing a pec cylinder and inserting a dielectric cylinder in it with inner and outer radii corresponding to the radius of the inner conductor and the radius of the outer conductor.

The most commonly used dielectric in coaxial cable is Teflon. It has a dielectric constant of about 2.1 and a very small loss tangent.

BR,
Adel
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top