How To Do Rectifier Simulation in Advanced Design Simulation (ADS)?

Status
Not open for further replies.
E

ecah2011

Newbie level 4
Joined
Feb 25, 2012
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,320
I have done designing a rectifier. However I am not really clear what should I do for the simulation. What we need to observe for a rectifier. How to do the analysis.

Here is my circuit


I hope somebody could teach me all these. Where to find, what to choose. I am interested to have a graph like this;



But always failed to do so. Please guide me..

Thanks in advance..
 

Which diode model you are using in the simulations?

I found HSMS8202 model has wrong pin connections.
You can do a quick test by connecting all the diodes in in the opposite way.
just give a try...
 
Reactions: Gervin

    G

    Gervin

    Points: 2
    Helpful Answer Positive Rating
What is your used a technique for designed rectifier ?
 
Reactions: Gervin

    G

    Gervin

    Points: 2
    Helpful Answer Positive Rating
KRISz said:
What is your used a technique for designed rectifier ?
Click to expand...

u mean the rectifier type..? it is villard voltage multiplier. i copy the circuit directly from a paper but didnot get at least the approximate value for the output
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…