Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] how to do dc analysis for this circuit in spectre

Status
Not open for further replies.
A

antaryami.mt.er09

Member level 2
Joined
Aug 14, 2010
Messages
49
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
INDIA
Activity points
1,576
Hi.......
For this circuit given below i am trying to do the DC Analysis taking voltages as
V1 = V7=Vb+Vin1; V2=V4=Vb+Vin2; V3=V5=Vb+Vin1; and V6=V8=Vb+Vin2
I am taking dc sources for Vb as V0,V1,V2,V3,V4 and another four dc sources as V5,V6,V7,V8 their voltages as Vin1 and Vin2 (respectively for V5,V6 it is vin1 and vin2 for other two),
when i'm selecting a dc source say v5 editing the parameter vin1 for 0V and Vin2 for 1 volt say it is not giving the expected result.
Plz help..........
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top