Dec 24, 2009 #1 E eem2am Banned Joined Jun 22, 2008 Messages 1,179 Helped 37 Reputation 74 Reaction score 24 Trophy points 1,318 Activity points 0 Hello, Do you have advice on how i may perform a conducted EMC test for a 40W LED Lamp( Switch Mode). Runs off 13V battery
Hello, Do you have advice on how i may perform a conducted EMC test for a 40W LED Lamp( Switch Mode). Runs off 13V battery
Dec 24, 2009 #2 flatulent Advanced Member level 6 Joined Jul 19, 2002 Messages 4,624 Helped 489 Reputation 980 Reaction score 151 Trophy points 1,343 Location Middle Earth Activity points 46,689 This requires specialized equipment, such as a very large bar of ferrite. You should go to a company that is certified to do such tests.
This requires specialized equipment, such as a very large bar of ferrite. You should go to a company that is certified to do such tests.
Dec 24, 2009 #3 FvM Super Moderator Staff member Joined Jan 22, 2008 Messages 52,879 Helped 14,777 Reputation 29,839 Reaction score 14,220 Trophy points 1,393 Location Bochum, Germany Activity points 300,104 The respective EMC standards are specifying the measurement methods together with the limit values, I think. You can check, if you are able to perform reliable measurements with your available equipment.
The respective EMC standards are specifying the measurement methods together with the limit values, I think. You can check, if you are able to perform reliable measurements with your available equipment.