Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to determine "step frequency" in CST software for Frequency domain solver

Status
Not open for further replies.
W

wave85

Member level 1
Member level 1
Joined
Apr 21, 2009
Messages
34
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Location
Iran
Visit site
Activity points
1,461
how to determine "step frequency" in CST software for Frequency domain solver

hi everybody.
I am simulating an antenna in CST software with Frequency domain solver. my frequency range is 0.7 GHz- 2.4 GHz. the result is good. my problem is step frequency. CST give me the result with step frequency of 0.002 GHz but i need to know what exactly is happening in each step of 0.001 GHz. anybody knows how i should set the frequency step in CST?

Many thanks in advance.
 

Re: how to determine "step frequency" in CST software for Frequency domain solver

wave85 said:
hi everybody.
I am simulating an antenna in CST software with Frequency domain solver. my frequency range is 0.7 GHz- 2.4 GHz. the result is good. my problem is step frequency. CST give me the result with step frequency of 0.002 GHz but i need to know what exactly is happening in each step of 0.001 GHz. anybody knows how i should set the frequency step in CST?

Many thanks in advance.
Click to expand...




,, here, you have to work .... screenshot_270.jpg
 
Re: how to determine "step frequency" in CST software for Frequency domain solver

thank you very much, really it was helpful.
 

Re: how to determine "step frequency" in CST software for Frequency domain solver

Dear Fiwi
i have another question. there is any way that i could see S11 result in each single step, too ? by your method, i could see farfield results in each step, but it does not show me the s11 result in each step.
 

Re: how to determine "step frequency" in CST software for Frequency domain solver

wave85 said:
Dear Fiwi
i have another question. there is any way that i could see S11 result in each single step, too ? by your method, i could see farfield results in each step, but it does not show me the s11 result in each step.
Click to expand...

,,, best would be, if you can post the CST file, for analysis ..!!
,,, and by the way, you will not view s11, step by step ..!!
 
Last edited:

Re: how to determine "step frequency" in CST software for Frequency domain solver

I attached it...
are u sure? there is not any way to watch S11 in each step?
 

Attachments

  • dipole2.rar
    10.7 KB · Views: 176

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top