sachinmaheshwari
Member level 4
8:1 mux
need help?
how to design of 8:1 mux with 2GHz frequency.
need help?
how to design of 8:1 mux with 2GHz frequency.
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
How to design 8:1 mux with 2GHz frequency?
- Thread starter sachinmaheshwari
- Start date
- Status
sachinmaheshwari
Member level 4
Re: 8:1 mux
i have to design using cadence so is there any way of designing using 2GHz frequency.
i made the design using transmission gate, so is it fine.
i have to design using cadence so is there any way of designing using 2GHz frequency.
i made the design using transmission gate, so is it fine.
master_picengineer
Banned
8:1 mux
Hi all,
Designing High speed devices became a real problem for front end designers since conventional tools for digital design can't satisfy their need in term of speed. I think that using an analog platform and designing at the transistor level is a solution.
@sachinmaheshwari
Can you post the schematic of the mux.
Can you tell me the technology that you you used ( 90n, 65nm ?).
What speed did you reach ?
Hi all,
Designing High speed devices became a real problem for front end designers since conventional tools for digital design can't satisfy their need in term of speed. I think that using an analog platform and designing at the transistor level is a solution.
@sachinmaheshwari
Can you post the schematic of the mux.
Can you tell me the technology that you you used ( 90n, 65nm ?).
What speed did you reach ?
- Status