How to design 12v to 3.6v Converter but with 2A current.

Status
Not open for further replies.

reflectarray

Member level 3
Joined
Nov 6, 2006
Messages
67
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,288
Activity points
1,615
12v to 3.6v

Hi anyone knows about how to design 12v to 3.6v Converter but with 2A current?
I will use it for powering Sony Ericsson GR47 modules. I have founfd the schematic below, but I couldnt find IC MIC4684 in my country. I need similar schematic but with different controller.


Any helps would be greatly appreciated.
 

12v to 3.6

May be this application note can help you.
 

    reflectarray

    Points: 2
    Helpful Answer Positive Rating
12v to 3.6 v

hi you can use some of the switching IC from Texas i am not sure something of the series tps. I am using tps54310 for 5v to 3.3v conversion
bye
som
 

12v to 3.3v converter

use linear tech LTC3703-5 or ISL6443 from intersil

L 10uH(power) from Vishay
Cap aluminum from national or OSCON from Sanyo C=150uF
F=300kHz
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…