socketz
Junior Member level 3
Protected EPM7128
I have a rom emulator which had a bad contact in it's SIMM socket.
I soldered the RAM to its socket and accidentally shorted 3 pins.
Some ports of the 7128 seem to have blown, since once I cleaned the solder (and replaced the SIMM socket) the device stopped working for good (DRAM errors).
I'd like to transfer the firmware to a new chip, but it's copy protected. Is there anything I can do?
Thanks.
I have a rom emulator which had a bad contact in it's SIMM socket.
I soldered the RAM to its socket and accidentally shorted 3 pins.
Some ports of the 7128 seem to have blown, since once I cleaned the solder (and replaced the SIMM socket) the device stopped working for good (DRAM errors).
I'd like to transfer the firmware to a new chip, but it's copy protected. Is there anything I can do?
Thanks.