How to convert data in ethernet protocol and transmit it?

[tech_pro]

Hi

i have 32 bit data in RS 422 format

i have to convert the data in ethernet protocol
then transmit it

at reception i will be reconverting it into 32 bit RS 422

but how plz guide

uzmeed

 

[bigdogguru]

Re: ethernet transciever

Actually your TCP/IP stack should take care of the conversion process.

What are the two endpoint devices connected by Ethernet and what TCP/IP stacks are they utilizing?

BigDog

 

[tech_pro]

Re: ethernet transciever

Thank u for ur reply

infact i am not connecting PC in my design

the input of transciever is from a digitizer ( stand alone) that will give 16 bit differential data (ie 32 bit RS 422 with data rate 20Mhz to 50Mhz)

then this data is to be transmitted over a distance of about 100ft

where i have to reconveret it in differential /TTL to input it in a FPGA

please suggest the solution

---------- Post added at 09:32 ---------- Previous post was at 08:08 ----------

i m sorry the the data type id 3.3LVDS

thanx