Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to configure U-BOOT for PC compatible board?

Status
Not open for further replies.
B

behzadkh

Junior Member level 1
Joined
Nov 20, 2003
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
146
hi, i wanty to use u-boot for a PC compatible target board. but i can't find any configuration file for PC. does anyone any experience about that? please help me.

behzad
 

Re: U-BOOT

There is already support for x86 on U-Boot.
There is an existing i386 in U-Boot. So you should be able to use 386 compatible processors. All the supported boards can be found at /u-boot/boards/ directory of source.

But if your board is not supported, may be you have to write board support files specific to the board. But most of the boards vendors used to provide u-boot firmware with the board itself.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top