How to change a 24 hour timer to 6 hours

Status
Not open for further replies.
L

Livingston

Full Member level 2
Joined
Nov 26, 2007
Messages
129
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Location
Chennai-India
Activity points
2,104
24 hour timer

This is the circuit of "24 hour timer" According to the setup shown in the image how can i get it for 6 hours

Will this circuit give reset signal for every 6 hours automatically?

Please help me this type of design's are new for me
 

24 hour timer

can you tell me the type of your ic
 
Reactions: dehgan

    D

    dehgan

    Points: 2
    Helpful Answer Positive Rating
Re: 24 hour timer

im not sure, but try this
conect R 4,7k to pin 1 to reset the IC every 6 h
remove Diode (d1)
 
Reactions: dehgan

    D

    dehgan

    Points: 2
    Helpful Answer Positive Rating
24 hour timer

RC oscillator time is equal to R x C
modify R or C value may work
TA
 

Good day....

the timing of the IC was controlled by the RC osillator formed by the Capactor C3 and resistor R3& R4, to change the timing , jist replace the value o the resistor or capacitor using the formula 1/2.3 X Rt X Ct and use the pot to correct the clock pulse, ie, after the first blink of the LED connected at the pin 9, vary the POT to set the delay B/W the nxt clk


Best Regards,

Sreejith
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…