Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to achieve a large resisitor in CMOS process?3Q

Status
Not open for further replies.

想买&

Newbie level 2
Newbie level 2
Joined
Jul 24, 2008
Messages
2
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,281
Activity points
1,304
except switch capacitor and mos in triode (too large leakage)
do you kind to tell me the way to achieve a large resistor (>1G) in cmos process?
thank you very muchi
 

A series of a certain number of diode-connected NMOS transistors is suitable for realizing large resistors. They should have very low \[\left(\frac{W}{L}\right) \], about \[0.24/30 \mu \mbox{m}\]. Furthermore, if you have access to LVT (Low Threshold) or better to ZVT (Zero Threshold) NMOS's you should use those kinds of TR.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top