Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How does the opamp gain affect the temperature coefficient?

Status
Not open for further replies.

sina25

Junior Member level 3
Joined
Sep 12, 2005
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,587
opamp bandgap

how does the opamp gain affect the temperature coefficient (TC)?, in a bandgap reference source that use an OPAMP to ensure two nodes have the same voltage

thanks
 

Re: opamp bandgap

I'm not too sure, but if I understand your question, look up this in google:

Brokaw bandgap reference

Depending on who designs the circuit, Brokaw references can (but do NOT always) use opamps in their design.
 

Re: opamp bandgap

The TC of the opamp offset change the TC of the bandgap.

Try to dec the opamp offset
 

Re: opamp bandgap

two clamped voltage is less 0.5mv if your bandgap voltage work well .its gain must be too large beacause of input offset .That your op works well is only reqiruments
 

opamp bandgap

The TC of bandgap is normally much higher than opamp.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top