ok...
As the robot operator, I want to use
Windows Remote desktop to so that I can
control the robot (laptop on wheels)
without wires from other computer.
As the robot operator, I want to use
C or C++ language to control the
serial port so that I can
use laptop's serial port.
As the robot operator, I want to use
Laptop's serial port to connect with the
microcontroller through RS232 so that I can
control the speed and direction of 4 motors.
As the robot operator, I want to use
microcontroller to control the
motors (wheels) so that I can
move the robot to any direction.
As the robot operator, I want to instruct the robot to
move forward so I can make it
accelerate.
As the robot operator, I want to instruct the robot to
move backward so I can
reverse its direction.
As the robot operator, I want to instruct the robot to
turn right so I can
steer it.
As the robot operator, I want to instruct the robot to
turn left so I can
steer it.
---------- Post added at 19:57 ---------- Previous post was at 19:45 ----------
could you please give me more details on how to create that protocol and how to use it..
thank you
---------- Post added at 19:58 ---------- Previous post was at 19:57 ----------
yes...just like how I described it