Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Host setting in DMSA

Status
Not open for further replies.
R

ruanwang

Junior Member level 1
Joined
Dec 21, 2014
Messages
18
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
108
Hello guys,

I've just built DMSA env to fix timing in PT.
But after set host, I can't create session.
I use this command:
set_host_options -num_processes 2 \
-submit_command "/tools/cad/synopsys/J_version/pts_J-2014.06-SP3/bin/pt_shell"

current_session -all
Error: Insufficient hosts online for command 'current_session'
('0' online, '1' required) (PA-003)
Error: Cannot set the current session. (UIMS-020)

So, What wrong with my command?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top