mpig09
Full Member level 4
Hi all:
My IC is easy to malfunction due to EMI interference.
I did two experiments to verify it:
based on the same PCB Board and the experiment environment,
I compare my chip and competitor's, the result shows my chip
easy to effect by EMI.
The malfunction :
My chip communication interface is I2C.
If you have any relevant paper or doc, please sharing to me.
If you have any suggestion, please let me know.
Thanks.
mpig
My IC is easy to malfunction due to EMI interference.
I did two experiments to verify it:
based on the same PCB Board and the experiment environment,
I compare my chip and competitor's, the result shows my chip
easy to effect by EMI.
The malfunction :
- some Register values are error
- Outputs Interrupt for no reason
My chip communication interface is I2C.
If you have any relevant paper or doc, please sharing to me.
If you have any suggestion, please let me know.
Thanks.
mpig