HFSS v9.0 S Parameters vs Vector EField plot

Status
Not open for further replies.

ghb

Advanced Member level 4
Joined
Jul 15, 2002
Messages
116
Helped
19
Reputation
38
Reaction score
13
Trophy points
1,298
Activity points
835
how to plot s-parameters hfss

i've come across something which isnt not clear to me
maybe someone can explain

when working with waveguide t-junction which has a 90 degree fold (both e & h) at the junction i have phase results which are confusing me

assume that port1 is the 'input' port while port 2 & 3 are the 'output' ports

if no calibration lines are used the s parameters say that the output ports are in phase. that is phase(s12) = phase(s13).

however when you view the e field in vector form you can see that they are indeed 180 degrees out of phase.

only if one applies a calibration line to each output port defining the e-fields in the same direction do i get s parameters which indeed support the fact that the outputs are 180 degrees out of phase.

i have attached the hfss file which has calibration lines 180 degrees out of phase. feel free to experiment with calibration lines.

lets discuss

gb
 

I believe that waveports without calibration lines assigned in HFSS will have arbitrary phase assigned. You can always view the port fields under "Port Field Display."

Hope that helps.

David
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…