HFSS problems with port definitions

Status
Not open for further replies.
S

Sevdam

Newbie level 6
Joined
Mar 23, 2017
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
80
Hey guys,

I just started working with hfss. I have to simulate a rectangular waveguide with a sample in it.
I have two questions on it:

1. I defined 2 waveports, but when I define a Radiation boundary box, my ports turn in to internal ports and I have to assign lumped ports to simulate

2. I would like to see the field on the port but I always get an error like: error can't read port field solution.

I treat on some tutorials and they didn't have such Problems like I have now. I hope someone can help me with my Problems


best regards

Sevdam
 

Sevdam said:
1. I defined 2 waveports, but when I define a Radiation boundary box, my ports turn in to internal ports and I have to assign lumped ports to simulate
Click to expand...

You can use waveports if you assign your radiation box such that two of its sides make contact with the ends of the waveguide. This way, the waveports will be both in contact with the waveguide and the bounding radiation box.

Sevdam said:
2. I would like to see the field on the port but I always get an error like: error can't read port field solution.
Click to expand...

Not sure what that's about, try the above first and it might resolve this.
 

Thank you very much,

my first Problem is gone now

but my second error is still appearing
 

Yes i can plot E-field and H-field Solutions, but still not port Solutions...
 

Something doesn't seem right there. Are you trying to plot fields on the port, or are you looking at the "Port Field Display"?
 

I am looking for the port field Display and it does not work
everything else is working beside of this...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…