Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS Non-Manifold Edges in Ground Plane

Status
Not open for further replies.
W

wisnuaditomo

Newbie level 1
Newbie level 1
Joined
Nov 14, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,286
Hi all,
I'm trying to use HFSS to create my 3D model and I was trying to validate it but there is a error message "non manifold edges found in GroundPlane" what does it means?
Here by I attach my design model using HFSS

Thanks in Advance!

View attachment triangular DGS.zip
 

Hi wisnuaditomo,
Problem is with how the triangle is formed. I have removed the subtraction of DGS objects from ground for easier viewing...
1.png

Let us zoom the area which is highlighted...
2.png

Observe that Box8 and Box9 is not forming the edge of triangle properly...
3.png

So While Subtracting Box8 and Box9 from DGS13.... Instead of making perfect triangle, this forms two triangles connected each other at the tip...
4.png


Solution: Adjust postion of Box8 and Box9 so that perfect triangle is formed.

Hope this helps...

Welcome to edaboard.com
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top