Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS, model RC lumped elements using LumpRLC

Status
Not open for further replies.
C

cl254

Junior Member level 2
Joined
Jun 25, 2009
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,458
Hi all,

I have one structure built up in HFSS and I want to put in series a R and a C to it. Do I just create one LumpRLC port to model the C and another LumpRLC port to model the R and connect them in series (flat, not vertical) and connect them to the end of my structure in series?

It is shown in the attached pic.

Thanks.
 

Attachments

  • RC_series.JPG
    RC_series.JPG
    58.9 KB · Views: 126

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top