HFSS--"Interpolating Sweep did not converge"

Status
Not open for further replies.
G

gunajraman

Member level 2
Joined
Aug 25, 2005
Messages
44
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Activity points
1,627
wide band simulation on hfss interpolating

Hi

I am simulating an antenna in the frequency range of 1-10 GHz. I am having my solution frequency at 2 GHz.

I am using an interpolating sweep with maximum solutions as 101 and points as 1001.

I am getting the error message that interpolating sweep did not converge.

What should I do ?

I would greatly appreciate your help.

Thanks.

Guna
 

interpolating hfss

Your solution frequency is to low, try using the upper half of the total range, say 6 or 7 GHz. Further to this, try refining the mesh or increasing the number of sweeps.
I do not have very good experience with the the interpolating sweep, it is to much of trial and error. Try adaptive sweep instead.
Personally, I prefer discrete sweep. It is time consuming, just keep it running overnight.
Hope this helps

 

hfss interpolating

Interpolating sweep is a very effective method for the wide-band applications. I think, in your case, you need to choose solution frequency - 10GHz.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…