f6dro
Newbie level 4
- Joined
- Oct 24, 2007
- Messages
- 6
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Toulouse France
- Activity points
- 1,338
Hello ,
I am runing an HFSS-IE simulation.
1st I have been simulating a dish feed and I've got correct results in HFSS.
2nd I have open an HFSS-IE design in the same project tree and I have described a 2m dish.
The simulation works OK and I get perfect results for the dish illuminated by the feed.
My problem is I can see the dish drawing in the HFSS=IE project and the dish feed drawing in the HFSS project , but I would like to see both , I mean the dish with the feed in front of it.
I know it is possible as there's an HFSS-IE tutorial wich is showing this , but I don't know how to do this in my project.
If anyone could help me...
Dom
I am runing an HFSS-IE simulation.
1st I have been simulating a dish feed and I've got correct results in HFSS.
2nd I have open an HFSS-IE design in the same project tree and I have described a 2m dish.
The simulation works OK and I get perfect results for the dish illuminated by the feed.
My problem is I can see the dish drawing in the HFSS=IE project and the dish feed drawing in the HFSS project , but I would like to see both , I mean the dish with the feed in front of it.
I know it is possible as there's an HFSS-IE tutorial wich is showing this , but I don't know how to do this in my project.
If anyone could help me...
Dom