Help with a high voltage power supply

Status
Not open for further replies.
T

Tino1210

Newbie level 3
Joined
May 20, 2009
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Hello, I need some assistance on a circuit i have for a high voltage power supply, using a bridge rectifier. There are several things i need to know

I need to know the working voltage of the smoothing capacitor and the ripple percentage when the motor is running and not running?
I also need to know what size the fuse should be to protect the power supply from an output short circuit?

Any help would be greatly appreciated,im at my wits end!!

I have inlcuded a drawing of the circuit:

 

Did you place the 100 ohm resistor intentionally? It must have a rating of about 1000 watt and causes 50 A input current.
 

FvM said:
Did you place the 100 ohm resistor intentionally? It must have a rating of about 1000 watt and causes 50 A input current.
Click to expand...

sorry,thats a scribble in reference to the power supply powering additional circuitry that has a resistive load of 100 ohms. Forgot to mention that, sorry.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…