Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help Wiring Circuit Breaker

Status
Not open for further replies.

brian25

Member level 2
Member level 2
Joined
Feb 18, 2013
Messages
52
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Visit site
Activity points
1,601
Hi i have a breaker. how to wire this in a circuit and connect the 12- 0-12 transfomer in that kind of breaker.
or is it possible to connect 3 appliance in one breaker(example is fan,radio and bulb) tnx

**broken link removed**
 
Last edited:

These are intended to be used in AC distribution boxes where they clip on to a DIN spec rail behind them. You can use them outside a distribution box by fitting wires into the top and bottom holes then clamping with the screws. Be careful, they are not designed to be reachable under normal circumstances and they are not to be used as power on/off switches or in DC circuits. Also note it is rated to open 'trip' only when more than 32 Amps flows through it, that equals as much as 8KW of power !

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top