ad620 circuits
Thank You for replly..
I've tried it but still not work..
I use Rg= ≈22k,, So G=≈3
±Vs = 10 Volt and Ref to GND
±IN = 1 Volt
Based on the output must 3 volt but in I just get 0.5 volt...
I try to increase the Input to 1.5 or 2 Volt but still not change,, the output ≈0.5.
I measure the output with meter,, one in Out and others in pin 5 (ref)
Can you tell me why this can happen??
Can you give me example more specific pin to pin how to use AD620...
Thank You