Help on Motor control with encoder, plc and drive

Status
Not open for further replies.
S

shadley

Newbie level 3
Joined
May 18, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
I got an assignment at Tech were i need to control a motor to stop at any position given. What im given is a siemens S7-300 plc, any encoder and a Telemaq or Siemens Drive.
Problem is i dont no were to start cause ive never worked with analoques.
How would my hardwiring look like from drive to plc and to analogue card and encoder.

How do i configure all of that and how would my program look like.
Please help, if any one can just give me or direct me to a sample program and hardwiring diagram i would really appreciate it.

Thanks
Shadley
 

hi
don't worry project is simple, only thing is you should know position control basics. Hardware details are incomplete such as:
motor type:stepper motor or servo motor
drive type: Variable frequency or Servo drive
your PLC having any encoder moule
 
Hi

Is there different methods to do this control...
can u do it using a stepper or servo?

drive type: Variable frequency or Servo drive(This can be any type)
The encoder module i do not no if its better to have that extra module i'll certainly add that to the plc.

Is the any books that i can download or buy that has real working examples of motor control programs, there diagrams and how the structure fits together out there?
Books that takes you from the start of design example through the programming steps and how every thing fits together would really be useful to have. (Siemens)

Much appreciated

 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…